The big-memory ESP32-S3 dev kit – dual-core 240 MHz, Wi-Fi + BLE 5, two USB-C ports
The ESP32-S3 adds vector instructions, native USB and plenty of memory to the ESP32 family, and the N16R8 module is its fully-loaded version: 16 MB of flash for large firmware and file systems, 8 MB of PSRAM for frame buffers, TFT graphics (LVGL) and audio pipelines. This board is the standard DevKitC-1 layout: two USB-C sockets (one on the UART bridge for flashing and logs, one on the native USB OTG), BOOT and RESET buttons, an addressable RGB LED and every GPIO on 2.54 mm rows. Works with ESP-IDF, Arduino and PlatformIO. We stock a unit with pre-soldered headers and one with loose headers – state your preference in the order note.
Loading reviews...