Hobbywing XRotor F7 Flight Controller + G2 45A 4-in-1 ESC Stack (AM32, 20×20)

About

This stack combines the Hobbywing XRotor F7 flight controller with the G2 series 45A 4-in-1 ESC. The F7 board runs Betaflight and has a dedicated port for DJI digital FPV air units, a built-in 5 V / 10 V BEC for cameras and VTX, and a pit-switch pad for the VTX. The 45A ESC runs the open-source AM32 firmware, supports 3–6S LiPo and uses the 20×20 mm mounting pattern shared with the flight controller, so the two boards stack cleanly on M2 standoffs. A 65A version (30.5×30.5 mm) is also available on request. In the box: F7 flight controller, G2 45A 4-in-1 ESC, connection cable, capacitor, silicone grommets and standoffs.